Last updated: November 2026

A new fence in Portland typically costs between $1,314 and $5,275, depending on the material, according to Angi's 2026 Portland guides. Chain-link sits at the low end, and wood, vinyl and aluminum overlap in the $2,100 to $5,300 band for a typical yard. Length and height matter more than anything else, so measure your fence line before you call.

Fence costs by material (Portland)

Material Typical project Average Installed cost per linear ft
Chain-link $1,314โ€“$3,842 $2,557 $8.50โ€“$42 (most $10.50โ€“$21)
Vinyl $2,128โ€“$5,000 $3,453 $15โ€“$40
Wood $2,133โ€“$5,275 $3,681 $11โ€“$33
Aluminum $2,160โ€“$4,315 $3,117 Materials $8โ€“$35

Sources: Angi Portland guides for wood (updated December 15, 2025), vinyl (February 25, 2026), aluminum (July 8, 2026) and chain-link (August 9, 2026). All accessed November 2026.

Angi's Portland aluminum guide also gives a wider range of $2,500 to $15,000 for aluminum fences in the city, which covers long or decorative runs.

Cost details by material

Wood. Angi's Portland guide prices wood fences at $11 to $33 per linear foot installed. The wood itself runs from about $1 per foot for pine to $17 per foot for tropical species. Local fence labor is $28 to $67 an hour.

Vinyl. Standard 4- or 6-foot vinyl runs $15 to $40 per linear foot: $10 to $30 for materials and $5 to $10 for labor. Angi's vinyl guide adds that difficult sites, slopes and extra gates can add $35 to $50 an hour in labor, and that vinyl installation in Portland tends to price below the national average.

Chain-link. Height sets the price per foot: $8.50 to $21 for a 4-foot fence and $9.50 to $23 for 5 feet, in Angi's Portland chain-link guide.

Aluminum. Materials run $8 to $35 per linear foot, and Portland fence contractors charge $60 to $90 an hour per worker to install it (Angi Portland aluminum guide). Most aluminum fences run 150 to 300 feet, per the same guide.

What drives fence prices in Oregon

Length and height. Every guide above prices by the linear foot, and taller panels cost more per foot.

Slope and site. Sloped yards and uneven ground add labor, per Angi's vinyl and aluminum guides.

Gates and add-ons. Angi's vinyl guide lists extra gates among the add-ons that raise labor cost.

Labor rates. BLS data shows Oregon fence erectors earn a mean $21.29 an hour, below the national $24.29 (May 2025). Hourly quotes in Angi's Portland guides still vary widely, from $28 to $90 depending on material and crew.

Licensing and permits

Oregon requires a Construction Contractors Board license for paid construction work on real property. Verify the installer on the CCB lookup and see our Oregon licensing guide. Ask whether the bid includes locating buried utilities and any city permit, and confirm where your property line is before posts go in.

Ways to save

  • Share the cost of a boundary fence with your neighbor, in writing.
  • Pick a standard height and panel style. Custom tops and decorative caps add cost.
  • Remove the old fence yourself if the contractor will credit you for it.
  • Get the price per foot, gate prices and post spacing in each written bid so they compare. Our contracts and payments section covers deposits and change orders.

Get fence quotes

Get free fence quotes or browse Oregon fence contractors. Redoing the yard at the same time? See landscaping costs in Oregon and concrete patio and driveway prices.

Sources

Frequently Asked Questions

What does a wood fence cost per foot in Portland?

Angi's Portland wood fence guide lists $11 to $33 per linear foot installed, with a typical project at $2,133 to $5,275 and an average of $3,681. Pine starts near $1 per foot for materials and tropical hardwoods reach $17.

Do I need a permit for a fence in Oregon?

It depends on your city or county and on the fence height and location. Check with your local building or planning office before you set posts, and ask the installer whether the permit is in the bid.

Does a fence contractor need a license in Oregon?

Oregon law requires anyone paid to do construction work that improves real property to hold a Construction Contractors Board license. Look the installer up at search.ccb.state.or.us before you sign.